Outer Corner Mode and Adjusting passes – Fusion 360 2D Contour Another parameter that will allow you to adjust the passes is Lead End Distance. This parameter will cause that at the end of the pass (at the distance from the end of the pass, specified in this parameter) the feedrate will be changed to…
Better surface finish after 2D Contour Additional finishing passes can be adjusted to get a better surface finish. The Leads on all Finishing Passes will add the tool in and tool out to each pass. When this option is unselected, we will get something like: As in any case, so in this, you have to…
Multiple Finishing Passes YouTube: https://youtu.be/F3j_0Iv0U9E Another option for contour machining is the Multiple Finishing Passes. With this option, we can increase the number of passes around the selected contour in one operation. After selecting the option Multiple Finishing Passes, two further fields are activated: Number of Finishing Passes and Stepover. Number of Finishing Passes The Number…
Minimum Cutting Radius YouTube: https://youtu.be/WpTVMsKlC7E During machining, often at the beginning of the process, we first use tools with a larger diameter to quickly and efficiently remove a large amount of material, and then go to tools with smaller diameters to properly finish the workpiece. When processing pockets or internal contours, their inner radius is…
Compensation Type – Cutter Radius Compensation – Fusion 360 2D Contour YouTube: https://youtu.be/LVmuSM–zIY Another important parameter is the Compensation Type, which means Cutter Radius Compensation. We have several options here to choose from. Before we discuss the above options and what is the compensation of the tool radius, let us explain the question of the basis…