Roughing Passes– Fusion 360 – 2D Contour (part 12)
|

Roughing Passes– Fusion 360 – 2D Contour (part 12)

Roughing Passes in 2D Contour machining The next section in the Passes tab in the 2D Contour operation is the Roughing Passes section. This section is responsible for the additional, roughing passes in the contour machining. Maximum Stepover The first parameter is the Maximum Stepover. this is the maximum step of passes. This is the…

Extension toolpath – Fusion 360 – 2D Contour (part 11)
|

Extension toolpath – Fusion 360 – 2D Contour (part 11)

Tangential Fragment Extension Distance Another parameter that will allow to adjust the passes is the Tangential Fragment Extension Distance parameter. This option is rateher applicable to open contours. The tool path wusing this option will look like the picture below. Without using this option, the tool path will look like in the picture below. You…