Line – Alphacam #1 The Alphacam course will start with one of the most basic functions – line drawing. Simple and easy to use command. To start drawing lines, from the Geometry tab, select Line. By the way, let’s begin to determine a convention of this course, which I will systematically complete. Now, when I…
Introduction to the Alphacam course Alphacam is a CAD/CAM software. It allows you to easily prepare machining programs for CNC machines. Most users of this software are associated with wood and wood-based materials machining, but there are also people who use this software successfully in metal or stone machining. Unlike other popular CAM solutions, Alphacam…
Rough Final Fusion 360 Rough Final is another parameter that applies in a specific situation. If we use Roughing Passes and the Finishing Stepdowns parameter in the Multiple Depths section, then in the case of configuration of parameters such as in the picture above, we will get the toolpaths as in the picture below. This…
Finish Only at Final Depth Fusion 360 Another parameter in the Multiple Depths section, in the Passes tab, in the 2D Contour operation is the parameter Finish Only at Final Depth. In order to notice the operation of this parameter, we must first specify the Number of Finishing Passes and the step of finishing passes…
Wall Taper Angle Fusion 360 If we would like to mill the wall and give it a tilt, we can use the Wall Taper Angle option. The tool path will look like this. It is clear that the tool path is farther away from the workpiece and we can assume that we will get a…