alphacam-3d-projection

Similar Posts

Contour machining part 3 – Milling Levels – Alphacam #23
|

Contour machining part 3 – Milling Levels – Alphacam #23

Byadmin

Contour machining part 3 – Levels and Cuts Tab – Alphacam YouTube: https://youtu.be/y2GXsR60M_4 The next tab in contour machining is the Levels and Cuts tab. This is where we define the upper and lower milling levels and the safe height. Let’s focus on the Z Levels section. Fill in the same way as in the…

Alphacam Basics – Mirror – lesson 31
|

Alphacam Basics – Mirror – lesson 31

Byadmin

Alphacam Mirror – Alphacam Tutorial for beginners Subscribe me on YouTube! YouTube: https://youtu.be/Apvv-7xWsF4 Alphacam allows you to create mirrored copy of your geometries. After selecting this command you have to select geometries that mirrored copy you want to receive. When you have selected geometries to mirror click RMB od Esc to accept selection. Now you…

Alphacam Basics – Geometry to construction – lesson 20
|

Alphacam Basics – Geometry to construction – lesson 20

Byadmin

How to change Alphacam ‘green’ geometry to construction – way 1 The first way to change the ‘standard’ geometry to construction geometry is moving geometry from Geometry layer to Construction layer using drag and drop method. This is very easy when we have small amount of geometries. When we have complex drawing with many geometries…

Tool Directions – Ghost Tools – Alphacam #12
|

Tool Directions – Ghost Tools – Alphacam #12

Byadmin

Tool Directions – Ghost Tools YouTube: https://youtu.be/0tqN1QMuFw4 At this moment, our drawing consists of several individual geometries. If we would like to machine, for example, an external shape, it would be difficult because we do not really have a geometry that completely represents the outer contour of the part. But how do you check it?…