Sometimes, when we machine a large number of geometries in one operation, it may happen that while selecting we forget to select all the required geometries.
We could prepare the operation again and point the geometries again, but there is a faster and easier way.
In this lesson, I’ll show you how to quickly add geometry to an existing operation.
https://youtu.be/WTBGVAOgSE8
Drawing rectangle – Lesson 1 – Alphacam Router Tutorial YouTube: https://youtu.be/dKXgiWZ8q6c Alphacam is a CAD / CAM system. Which means that it has a built-in CAD module in which we can create geometries from scratch. While the CAM module is very advanced, the CAD module is basic. However, in many cases CAD functionality can be…
Set materials – Alphacam Tutorial In this lesson I will show you how to set material. Setting the material will allow us to run a solid simulation. https://youtu.be/7KCDLTAvVGE
Machining order and basic info – Alphacam Tutorial In this lesson you will learn how to change the order of operations to optimize tool changes. You will also learn how to check how long individual operations and all machining take. https://youtu.be/wVkXlh3_5VQ
Define Tool – Lesson 11 – Alphacam Router Tutorial We need a tool to start machining. Alphacam has a library of several tools that are installed by default. But you will not use them in your everyday work. Therefore, we will define our own tool with specific parameters. From the Machine tab, select the Define…
3D Finishing – Alphacam Tutorial In this lesson, we will prepare the first 3-axis finishing. https://youtu.be/YBhIksrFuww
Engraving Geometry – Alphacam Tutorial In this lesson, we will prepare the geometry for engraving in Alphacam. https://youtu.be/hKf6TupFrYU