Subscribe me on YouTube!
In the video below you will see:
– how to draw a sample drawing in DraftSight
– how to import DWG from DraftSight to Alphacam
– how to set material in Alphacam
– rough or finish strategy
– pocketing strategy
– drilling strategy
– solid simulation
Circle through two points Another option to draw a circle is 2 Points option. After selecting this function, you can specify two point forming a circle diameter. You can click two points in the work area or enter the XY coordinates of this points. Please see see the video on YouTube!
Circle in Alphacam The next basic geometry that we will often use is the circle. You can draw a circle in Alphacam in several different ways, which is already visible when choosing a command. The Geometry |Circle command is expanded and there are seven ways to draw circles. However, although there are many ways to…
DraftSight Tutorial for Beginners How to draw a line with a specific length and angle? Watch this video! Subscribe me on YouTube! DraftSight – Draw a line at an angle
Delete command YouTube: https://youtu.be/IwSuIE9dED8 In the previous post I mentioned how to check if the geometry division worked correctly. For this purpose, we used the Edit | Delete command. Of course, the use of this command is different, as the name implies is used to delete geometry (or toolpaths). Choose Edit | Delete. Now on…
Edit | Offset – Alphacam YouTube: https://youtu.be/hS612ZeVC_0 We now draw a circle in the middle of a large circle with a radius of 15 smaller than this circle. We could use the Arc CENTER of snap, but there is an opportunity to show the Offset function. Choose Edit | Offset. The following window will appear….
Update Tool Path – Alphacam YouTube: https://youtu.be/ewTbynOJQIA Previously, I showed you how to move the geometry to the origin of the coordinate system. Of course, we can use the move function not only when we want to move the geometry to the origin of the coordinate system. Sometimes you just have to move the geometries…