Work with DXF – Alphacam Tutorial – Lesson 27
Work with DXF – Alphacam Tutorial
In this lesson I will show you how to adjust a DXF file so that the geometries are suitable for preparing machining strategies.
https://youtu.be/1fCYON0-y9U
In this lesson I will show you how to adjust a DXF file so that the geometries are suitable for preparing machining strategies.
https://youtu.be/1fCYON0-y9U
Rough or Finish – Lesson 12 – Alphacam Router Tutorial Machining strategies in Alphacam are located in the Machine tab. To be able to choose a machining strategy, we must first select a tool. From the Machine tab, select the Select Tool option. The Alphacam tool table appears. Initially, it opens with a list of…
Bolt Hole Circle – Lesson 7 – Alphacam Router Tutorial YouTube: https://youtu.be/oXVRcu8JzUs We will now draw circles with a diameter of 9 and 15 mm, lying on a circle with a diameter of 150 mm. There is a function in Alphacam that makes it easier. From the Geometry tab, expand the Special Geometries option and…
3D Engraving – Alphacam Tutorial In this lesson, we will prepare a 3D Engraving operation in Alphacam. https://youtu.be/ZQelPzC-qYA
Work Planes – Alphacam Tutorial In this lesson you will learn how to activate local work planes and how to draw geometries on local work planes in Alphacam. https://www.youtube.com/embed/9ezsaXFh5Bk
Define Tool – Lesson 11 – Alphacam Router Tutorial We need a tool to start machining. Alphacam has a library of several tools that are installed by default. But you will not use them in your everyday work. Therefore, we will define our own tool with specific parameters. From the Machine tab, select the Define…
Helical Milling – Alphacam Tutorial Helical milling is a very interesting way of milling. In this way, we can easily machine tight channels or holes. In this lesson you will learn how to prepare helical milling in Alphacam. https://youtu.be/_ur7WjZfpmk