Work Planes – Alphacam Tutorial – Lesson 37
Work Planes – Alphacam Tutorial
In this lesson you will learn how to activate local work planes and how to draw geometries on local work planes in Alphacam.
https://www.youtube.com/embed/9ezsaXFh5Bk
Similar Posts
Set materials – Alphacam Tutorial – Lesson 17
Set materials – Alphacam Tutorial In this lesson I will show you how to set material. Setting the material will allow us to run a solid simulation. https://youtu.be/7KCDLTAvVGE
Machining Excercise – Alphacam Tutorial – Lesson 42
Machining Excercise – Alphacam Tutorial In this lesson, we will practice machining in Alphacam. https://youtu.be/klUzViE3lmY
Import 3D and Align Part – Alphacam Tutorial – Lesson 46
Import 3D and Align Part – Alphacam Tutorial In this lesson, we will import the 3d part into Alphacam and set it up for machining using a 3-axis machining strategy. https://youtu.be/e6Po_LsOWuw
Dimensions – Alphacam Tutorial – Lesson 8
Dimensions – Lesson 8 – Alphacam Router Tutorial YouTube: https://youtu.be/VDrE_CvZULY To give you more information on the CAD functionality of the Alphacam, it is worth saying a few words about dimensions. At least to add or check basic dimensions. Dimensioning is in the CAD tab. Choose this option. And first we need to specify what…
Machining on Work Planes – Alphacam Tutorial – Lesson 38
Machining on Work Planes – Alphacam Tutorial In this lesson you will learn how to prepare machining on local work planes in Alphacam. https://www.youtube.com/embed/0Gnp0cjvte8
Bolt Hole Circle – Alphacam Tutorial – Lesson 7
Bolt Hole Circle – Lesson 7 – Alphacam Router Tutorial YouTube: https://youtu.be/oXVRcu8JzUs We will now draw circles with a diameter of 9 and 15 mm, lying on a circle with a diameter of 150 mm. There is a function in Alphacam that makes it easier. From the Geometry tab, expand the Special Geometries option and…