3D Finishing – Alphacam Tutorial In this lesson, we will prepare the first 3-axis finishing. https://youtu.be/YBhIksrFuww

Machining on Work Planes – Alphacam Tutorial In this lesson you will learn how to prepare machining on local work planes in Alphacam. https://www.youtube.com/embed/0Gnp0cjvte8

Tool directions – Lesson 10 – Alphacam Router Tutorial YouTube Video: https://youtu.be/2aiolqVqzX8 Let’s prepare geometry for applying toolpats. Open the first part, p1-geometry-2d. First, hide the Dimensions layer and the Construction layer. Let’s turn on the visibility of the geometry direction arrows (Ctrl + G). In addition to the fact that one arrow means one…

Machining Simulation – Lesson 14 – Alphacam Router Tutorial We can run the simulation in several ways. I will now show the two most used. The simulation can be started by selecting the appropriate type of simulation from the View tab. Or simply by right-clicking in the work area and choosing Simulation from the circular…

Rough or Finish – Lesson 12 – Alphacam Router Tutorial Machining strategies in Alphacam are located in the Machine tab. To be able to choose a machining strategy, we must first select a tool. From the Machine tab, select the Select Tool option. The Alphacam tool table appears. Initially, it opens with a list of…

Align Part – Alphacam Tutorial In this lesson you will learn how to import and properly set the 3D part to machining in Alphacam. https://youtu.be/CG7XFItwrWc