Chamfer – SolidWorks Tutorial #8

chamfer solidworks

If you find my tutorials helpful, you can support CADCAMLessons:
https://ko-fi.com/cadcamlessons

Chamfer – SolidWorks Tutorial #8


At this moment, we can add chamfers on the edges.

To select the Chamfer operation, expand the menu under the Fillet button.

Select the four edges of the part as the Items To Chamfer and specify the chamfer parameters as a distance of 2 mm and an angle of 45 degrees.

Ok, let’s accept it and the chamfer has been added.

Now let’s add a chamfer on the upper edge of the hole.

And let’s add a chamfer for four horizontal edges.

And you will get.