admin, Author at cadcamlessons

Contour machining part 1 – Rough or Finish – Alphacam #21

January 21, 2019October 6, 2023admin

If you find my tutorials helpful, you can support CADCAMLessons: https://ko-fi.com/cadcamlessons Contour machining part 1 – Rough or finish – Alphacam YouTube: https://youtu.be/M7RXJq12MJw [...]

Select Tool – Alphacam #20

January 18, 2019October 6, 2023admin

If you find my tutorials helpful, you can support CADCAMLessons: https://ko-fi.com/cadcamlessons Select Tool – Alphacam YouTube: https://youtu.be/J5fnlIbOAg0 The first thing we need to [...]

Change background color – Alphacam #19

January 16, 2019October 6, 2023admin

If you find my tutorials helpful, you can support CADCAMLessons: https://ko-fi.com/cadcamlessons Change the background color – Alphacam YouTube: https://youtu.be/KRfQrCAmn68 Before we get into [...]

Enclosing rectangle – Alphacam #18

January 14, 2019October 6, 2023admin

If you find my tutorials helpful, you can support CADCAMLessons: https://ko-fi.com/cadcamlessons Enclosing rectangle – Alphacam YouTube: https://youtu.be/nbKU8LH6PiA A function that simplifies the creation [...]

Preparation for machining – Alphacam #17

January 11, 2019November 18, 2023admin

Preparation for machining – Alphacam YouTube: https://youtu.be/rOIYsE9i3Yg The geometry is almost ready for machining. At the beginning, remove the outer rectangle. It’s a [...]

Edit | Join – Alphacam #16

January 9, 2019November 18, 2023admin

Edit | Join – Alphacam YouTube: https://youtu.be/oUpHEnoogMY Previously, we mentioned that each arrow is a separate geometry. At this point, the outer contour [...]

Order by Depth – Fusion 360 – 2D Contour (part 18)

January 8, 2019November 18, 2023admin

Order by Depth Fusion 360 Order by Depth In the case of machining several separate parts segments, we can determine in which order [...]

Edit | Trim – Alphacam #15

January 7, 2019November 18, 2023admin

Edit | Trim – Alphacam YouTube: https://youtu.be/oQhagFa7APQ The second way to extract a fragment of geometry is to use the Trim function. We [...]

Edit | Break – Alphacam #14

January 4, 2019November 18, 2023admin

Edit | Break – Alphacam YouTube: https://youtu.be/HfAQZ_qkLks Previously, we talked about geometry direction arrows and that one arrow represents one geometry. Our external [...]

Start Point – Alphacam #13

January 2, 2019November 18, 2023admin

Start Point – Alphacam YouTube: https://youtu.be/wgGXTfU6lss You know how to change the direction and side of machining, but you must know that the [...]

cadcamlessons

CAD/CAM lessons from scratch

Author
admin

Contour machining part 1 – Rough or Finish – Alphacam #21

Select Tool – Alphacam #20

Change background color – Alphacam #19

Enclosing rectangle – Alphacam #18

Preparation for machining – Alphacam #17

Edit | Join – Alphacam #16

Order by Depth – Fusion 360 – 2D Contour (part 18)

Edit | Trim – Alphacam #15

Edit | Break – Alphacam #14

Start Point – Alphacam #13