Outer Corner Mode – Fusion 360 – 2D Contour (part 10)
Outer Corner Mode and Adjusting passes – Fusion 360 2D Contour Another parameter that will allow you to adjust the passes is Lead
[...]
Better Surface Finish – Fusion 360 – 2D Contour (part 9)
Better surface finish after 2D Contour Additional finishing passes can be adjusted to get a better surface finish. The Leads on all Finishing
[...]
Multiple Finishing Passes – Fusion 360 – 2D Contour (part 8)
Multiple Finishing Passes YouTube: https://youtu.be/F3j_0Iv0U9E Another option for contour machining is the Multiple Finishing Passes. With this option, we can increase the number of
[...]
Minimum Cutting Radius – Fusion 360 – 2D Contour (part 7)
Minimum Cutting Radius YouTube: https://youtu.be/WpTVMsKlC7E During machining, often at the beginning of the process, we first use tools with a larger diameter to
[...]
Compensation Type – Fusion 360 – 2D Contour (part 6)
Compensation Type – Cutter Radius Compensation – Fusion 360 2D Contour YouTube: https://youtu.be/LVmuSM–zIY Another important parameter is the Compensation Type, which means Cutter Radius
[...]
Sideways Compensation – Fusion 360 – 2D Contour (part 5)
Sideways Compensation – Passes Tab Fusion 360 YouTube: https://youtu.be/7HTTUc8fM14 Next tab in 2D Contour is Passes. Compared to the Passes tab from the
[...]
Rest Machining – Fusion 360 – 2D Contour (part 4)
Fusion 360 Rest Machining YouTube: https://youtu.be/Tz0wIXt6-jw Another option is Rest Machining. Rest machining often speeds up the machining of a part. We are
[...]
Fusion 360 – Tabs – 2D Contour (part 3)
Fusion 360 Tabs – 2D Contour YouTube: https://youtu.be/f9pdG7reuTU The next section in the Geometry tab is the Tabs section. We have the option
[...]
Fusion 360 – Stock Contours – 2D Contour (part 2)
Stock Contours – Fusion 360 2D Contour YouTube: https://youtu.be/m1ekL8GTYLY The Stock Contours option allows you to limit the tool path to the selected
[...]
Fusion 360 – Contour Selection – 2D Contour (part 1)
Fusion 360 2D Contour – Geometry YouTube: https://youtu.be/DIL6FRkplQI Contours machining, like faceing, belongs to the 2D machinings. On CAM systems, this strategy generates
[...]