## Order by Depth – Fusion 360 – 2D Contour (part 18)

Order by Depth Fusion 360 Order by Depth In the case of machining several separate parts segments, we can determine in which order
[...]

Skip to content
# cadcamlessons

## CAD/CAM lessons from scratch

## Order by Depth – Fusion 360 – 2D Contour (part 18)

## Edit | Trim – Alphacam #15

## Edit | Break – Alphacam #14

## Start Point – Alphacam #13

## Tool Directions – Ghost Tools – Alphacam #12

## Edit | Offset – Alphacam #11

## Arc CENTER of Snap – Alphacam #10

## Find geometry – Alphacam #9

## TANGENT to Snap – Alphacam #8

## QUADRANT point Snap – Alphacam #7

Order by Depth Fusion 360 Order by Depth In the case of machining several separate parts segments, we can determine in which order
[...]

Edit | Trim – Alphacam The second way to extract a fragment of geometry is to use the Trim function. We will discuss
[...]

Edit | Break – Alphacam Previously, we talked about geometry direction arrows and that one arrow represents one geometry. Our external contour consists
[...]

Start Point – Alphacam You know how to change the direction and side of machining, but you must know that the arrow also
[...]

Tool Directions – Ghost Tools At this moment, our drawing consists of several individual geometries. If we would like to machine, for example,
[...]

Edit | Offset – Alphacam We now draw a circle in the middle of a large circle with a radius of 15 smaller
[...]

Arc CENTER of Snap Another useful snap is the Arc CENTER of snap. With its help, you can easily find the center of
[...]

Find geometry – Alphacam Another useful option is the Find. Allows to find the indicated geometry in the geometry list. Suppose we want
[...]

TANGENT to Snap Now we will practice the TANGENT to snap. In the centers of the lines that we drew previously, draw circles
[...]

QUADRANT point Snap Another snap worth discussing in the initial stage of learning Alphacam is the QUADRANT point. We draw lines (the ones
[...]